SolaDeck is a PV wire enclosure and seamless flashed product all in one. SolaDeck eliminates the multiple parts and respective labor typically needed to accomplish the roof penetration for a weather-tight wiring passageway into the home.
Unique in the solar industry, SolaDeck is designed with a seamless flashing consistent with standard roofing practices for roof penetration. All SolaDeck models are third party tested by ETL to the UL50 Type 3R and UL1741 standards. This ensures high quality and reliability of every model.
All SolaDeck enclosures feature:
18 gauge galvanized steel
Powder coated finish
Seamless stamped construction
Three roof deck knockouts (½", ¾", 1")
Five center points for entry or exit
Two position ground block
Flashes in the roof system
Mounting hardware included
Listed to respective UL standards
18 Gauge Steel Base (1) and Cover (2) Pre Punched 7 holes in base (1) for roof deck Pre Punched 4 holes in base (1) and cover (2) for match Draw Process both parts Powder Coated to withstand 1000 hours Salt Spray (Primer Gray) High UV resistance 15” x 15” flashing dimension Cavity dimension 8”W x 9” L x 2.5”D Approx. 162 Cubic inch equipment cavity Norloked steel base plate (3) to drawn base (2) Three knockout locations .5”, .75” and 1” 3” DIN rail installed Grounding Lug- Installed (In Equipment Cavity) Wire Strain Relief Clip –Installed (In Equipment Cavity) Hardware pack withstands 500 hours Salt Spray 7 - 2” Trusshead Screws 4 - .5” 8-32 thread cutting screws 4 - #10 Bonded Seal washers 1 – Foam closed Cell Seal ETL Listed UL50 Type 3R Total Weight 6.9 pounds each Packaging: Individually bagged and boxed Box dimension 15.5”w x 16” L x 3” D White Carton labeled with Cut out template Print One Color - Black Master Cartons of 6 Units each Master Carton dimension 18.75”x16”x16.375” Master Carton Weight – 42 pounds 18 Master Cartons per skid Approx 800 pounds with skid