SOLAR-LOG Sensor Box Commercial, Including irradiation & module temperature sensor and connector for wind sensor and ambient temperature sensor. Wind sensor and ambient temperature sensor not included. 2 years warranty.
ACCESSORY PART SUITABLE FOR:
Solar-Log1000 | Solar-Log500 | Solar-Log200 | Solar-Log 2000 | Solar-Log 1200
Sensors measure the precise deviations between the potential power production and the current power production and deliver key statistical values in regard to the quality of the whole plant. The most important element in the Sensor Box Commercial is the irradiation sensor. This delivers a reference value for solar radiation and enables conclusions to be drawn about possible power generation problems. Due to the built-in internal module temperature sensor, it is easy to analyze reductions in performance. The sensor evaluation provides information about the cause of the fault. Up to 9 Sensor Boxes Commercial can be connected. The irradiation sensor is equipped with a high-quality monocrystalline cell which is rugged and specifically designed for long-term use in outdoor locations. It is not possible to use this device with RS422 inverters and some RS485 inverters on the same bus.The most important element in the sensor box is the irradiance sensor. This delivers a reference value for solar radiation and enables conclusions to be drawn about possible power generation problems. The irradiance sensor consists of single solar cell and should be installed at the same angle as your panels. This helps to serve as an ideal reference value. Drops in performance even at low levels of radiation can be identified and error messages generated. Due to the built-in internal module temperature sensor, it is easy to analyze reductions in performance.Benefits of communication between the Solar-Log™ and the Sensor Box:
The irradiance sensor is equipped with a high-quality monocrystalline cell, which is rugged and speciﬁcally designed for long-term use in outdoor locations. The sensors are installed parallel to the panels they are meant to monitor and are connected to the Solar-Log™via an RS485 interface. Sensor Box Commercial accessoriesAmbient temperature sensor The optional ambient temperature sensor (PT1000) delivers additional information. One problem that could arise and contribute to low yields is the combination of cold temperatures and sunshine causes a buildup of ice. The sensor can confirm the presence of such a problem.Wind sensor
- Solar-Log ™ generates an error message in response to any variance that occurs.
- Errors and malfunctions can be filtered out and analyzed rapidly and reliably.
- The sensor evaluation provides information about the cause of the fault.
- Up to 9 Sensor Boxes can be connected to the Solar-Log1000
The wind sensor enables wind strengths to be tracked and in the event of breakdowns or reduced power output, to better identify storm damage as a possible cause.