UNIRAC SolarMount End Clamp F 45-47mm Clear 302025C
- Estimated Ship Out Time: 2 Days
- Minimum Quantity Order:
UNIRAC SolarMount End Clamp F Clear 302025C
UNIRAC SolarMount End Clamp F Clear 302025C, 45-47mm (1.77-1.85in), 2.50in T-bolt, Package of 1 Provides bond from rail to endclamp. Pre-assembled aluminum clamp. Supplied washer keeps clamp and bolt upright for ease of assembly. SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty
Installation Instructions:INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation.
INSERT ENDCLAMP T-BOLT: Insert 1/4” T-bolt into rail.
ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module.
INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.
POSITION INDICATOR - SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.
TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.
TORQUE VALUE 1/4” nuts to 10 ft-lbs w/ Anti Seize