NOTE: This item no longer available. The older M215/M250 microinverters cannot be mixed with the newer generation IQ6/7/8 inverters as their specifications and communication protocols are incompatible. Enphase has solved this problem by developing a special version of the M215/M250 inverters based on 7th generation IQ Series.Enphase 240VAC 1-Phase Engage Trunk Cable For M215, M250 S230 and S280 PORTRAIT MOUNTING (40in), ET10-240-SINGLE, Sold per drop
Renvu does not offer these specialized replacements, but they can be acquired at the Enphase store. Check out additional information about compatibility and purchase from Enphase at:
Fits all, M215 , M250, S230 and S280The Engage Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed.
For Portrait orientation install
Each drop has 40" wire
For 1-Phase applications (240V)
The Enphase Energy Microinverter System improves energy harvest, increases reliability, and dramatically simplifies design, installation and management of solar power systems.
The Enphase System includes the microinverter, the Envoy Communications GatewayTM, and Enlighten®, Enphase's monitoring and analysis software.
The Enphase Microinverter
Enphase has pioneered a new approach to managing solar power that makes solar systems smarter and more efficient.
Traditionally, solar panels are connected together in series circuits fed into a single, central inverter device. This means that one inverter controls tens, hundreds or even thousands of solar panels as if they are one unit operating at the same power level. This approach reduces the overall system efficiency and limits the available information about individual panel health.
Enphase replaces these large central inverters with small micro-electronics that attach to each solar panel. These devices, known as microinverters, allow each panel to operate independently, leading to significant improvements in energy production and adding a new layer of intelligence throughout the system.
The Enphase System
Each Microinverter integrates with advanced networking technology and web-based software to enable new levels of intelligence and connectivity in the solar array.
Specifically, the Enphase Microinverter System consists of the following components:
The Microinverter that connects to each solar module and converts DC power to grid-compliant AC power
The Envoy Communications Gateway that networks with each microinverter and transmits performance information to the internet
The Enlighten software where Enphase customers can monitor and manage their solar power systems 24 hours a day