IronRidge FlashFoot2 FF2-02-M2 Mill Flashing Kit

IronRidge® FlashFoot2® raises the bar in solar roof protection. The unique water seal design is both elevated and encapsulated, delivering redundant layers of protection against water intrusion. In addition, the twist-on Cap perfectly aligns the rail attachment with the lag bolt to maximize mechanical strength.

Twist-On Cap FlashFoot2®’s unique Cap design encapsulates the lag bolt and locks into place with a simple twist. The Cap helps FlashFoot2® deliver superior structural strength, by aligning the rail and lag bolt in a concentric load path.

Single Socket Size A custom-design lag bolt allows you to install FlashFoot2® with the same 7/16” socket size used on other Flush Mount System components.

Three-Tier Water Seal FlashFoot2®’s seal architecture utilizes three layers of protection. An elevated platform diverts water away, while a stack of rugged components raises the seal an entire inch. The seal is then fully-encapuslated by the Cap. FlashFoot2® is the first solar attachment to pass the TAS-100 Wind-Driven Rain Test.

Water-Shedding Design An elevated platform diverts water away from the water seal.