• Home
  • -
  • QUICKMOUNT QMSC-A 1 Composition Mount 12"x12" Mill Finish, Qty.1

QUICKMOUNT QMSC-A 1 Composition Mount 12"x12" Mill Finish, Qty.1

Est. Ship Out Time: 2 Days

Please email info@renvu.com for availability

Details

QUICKMOUNT QMSC-A 1 Composition Mount 12"x12" Mill Finish, Qty.1

Sold Individually

Each mount kit includes:
  • Cast aluminum mounting block (2-1/4" L x 1-1/4" W x 1-1/4" H) bonded with .05" thick, 12" x 12" aluminum flashing
  • Hanger bolt, 5/16" x 6" (1-1/4" machine, 1-3/4" shank, 3" lag)
  • Stainless steel and EPDM rubber sealing washer, 3/4" x 5/16"
  • Two 5/16" hex nuts
  • EPDM sealing washer with 60 Durometer hardness
  • Stainless steel flat washer, 1" x 5/16"


Tools needed for installation
  • Tape measure
  • Roofer's bar/shingle ripper
  • Chalk line
  • Stud finder
  • Caulking gun
  • Sealant compatible with roofing materials
  • Drill with 1/4" bit
  • Drill or impact gun with deep 1/2" socket




The Classic Comp, the industry's best-selling solar panel mount for rooftop installations of PV and solar water heating systems, uses our patented QBlock Elevated Water Seal technology to ensure a long, watertight life on composition/asphalt shingle roofs. The Classic Comp was also designed to install fast, with just a single bolt. It is backed by solid engineering and certified for strength and waterproofing by the ICC-ES (ICC-ESR-2835)*. The Classic Composition Mount is the most universally code-compliant mount available for composition/asphalt shingle roofs.


FEATURES

  • Stainless steel hardware (included)
  • 10-year warranty; 50-year expected life
  • Works with all leading racks
  • Won't void roof manufacturer's warranty
  • Approved for use by leading roof manufacturers
  • Meets or exceeds roofing industry best practices
  • 2554 lbs. average pullout (Douglas fir); 2203 lbs. average shear
  • ICC-ES certified
  • One bolt installation
  • No shingle cutting
  • 100% IBC compliant
  • Patent numbers 7,762,027 & 7,895,808


There's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the course above, drive the bolt home, and it's done. This video documents the 60-second process.

The 12 x 12-inch Classic Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Classic Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!



Characteristics

  • Manufacturer: QuickMount PV
  • Model: QMSC-A 1
  • Rated Power Output [W]: 1
  • Length [mm (in)]: 12 inch
  • Width [mm (in)]: 12 inch