NEW! DATASHEETS NOW AVAILABLE
Encharge is Enphase’s new brand of AC-coupled battery systems. The initial roll-out model is the Encharge 3, an LFP battery with no moving parts.
3.36 kwh Battery
Safe and Reliable LFP Chemistry; allows 100% depth of discharge!
No moving parts
10 year or 4000 cycles warranty
Storage degrades over time
Minimum 70% residual storage will be available (warrantied!) at the end of 10 years or 4000 cycles, whichever is sooner
Weight: 40.0kg (~89lbs.)
WxHxD: 13.5” x 25.0” x 12.0”
-15 OC to 50 OC
NEMA 3R (indoor and outdoor both allowed, but avoid direct sunlight)
20A circuit required
Flexible and Scalable (AC connected; three Encharge 3 = one Encharge 10)
2 person install
Ensemble built in
Each Encharge 3 has (4) Enphase IQ8 microinverters built-in, representing 1.28kW nominal power available (surge functionality allows for slightly more)
DC energy in this battery + grid-forming IQ8 microinverters = this battery forms a utility signal!
Moreover, if the battery is connected with the home, the IQ8 micros can tell the IQ6/7 on the roof to turn on
In other words, you can use this battery in replacement of the entire grid specifically for IQ systems
Shared bus architecture = no single point of failure. If a microinverter goes down, you lose some “horsepower” but you still have access to the full “tank” of battery storage.
In the future, Enphase will release the Encharge 10 which is comprised of (3) Encharge 3 batteries held within a single structural unit. Each Encharge 10 has (12) IQ8 microinverters which create nominal power of 3.84kW.
|◁ Back to the Main Article||Explore the latest Enphase Energy products ▷|