QuickMount Low Slope no flashing 6 1/2 post+1/2in base Mill

QuickMount PV

SKU#: QMLSH-7 A 12

QuickMount Low Slope no flashing 6 1/2 post+1/2in base Mill

QuickMount, Mounts for Low Slope Roofs -no flashing, 6 1/2" post + 1/2" base, Mill Finish | QTY 12: QMLSH-7 A 12

Sold Individually

Quick Mount PV's QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. It's the strongest you can buy for mechanically attaching commercial solar systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low-slope roofs (aka 'flat roofs') used in commercial roofing.

Each QuickMount kit includes:
• Cast aluminum QBase
• Two zinc-coated steel lag bolts, 5/16" x 3"
• Aluminum post, 1.25" x 6.5", 8.5" or 11.5"
• EPDM-bonded stainless steel sealing washer, 5/16" x 1-1/4"
• Stainless steel machine bolt, 5/16" x 1"
• Stainless steel fender washer, 5/16" x 1"
• Stainless steel split lock washer, 5/16"
• Grade-8 machine bolt, 5/16'' x 3/4''

Quick Mount PV's QBase Low Slope Mount Features:
• Code compliant for all non-metal low slope roofs
• QBase is the strongest off-the-shelf mechanical mount
• All exposed hardware is 18-8 stainless steel
• 3 post heights offer 7", 9" and 12" clearance off the deck
• Attaches to roof with 2 or 4 fasteners
• 25-year warranty; 50-year expected life
• Meets or exceeds roofing industry best practices
• All fasteners and hardware included

Tools needed for installation of the Quick Mount PV's QBase Low Slope Mount:
1. Tape measure
2. Chalk line
3. Caulking gun
4. Roofing-compatible flashing and related waterproofing materials
5. Drill with 1/4" bit
6. Drill or impact gun with 1/2" deep socket

Product Specifications

Characteristics
ManufacturerQuickMount PV
ModelQMLSH-7 A 12
Rated Power Output [W]1
Length [mm (in)]6 1/2 inch
Width [mm (in)]
Depth [mm (in)]
Weight [kg (lb)]
Warranty [Years]

Surge/Lightning Protection
Maximum Volts [Vdc]
Discharge Current [kA]
Nominal DC Voltage Range [Vdc]
Nominal AC Voltage [Vac]

Modules
PTC Power Rating [W]
Tier Level
Lower Output Tolerance [-%]
Upper Output Tolerance [%]
Only suitable for transformer invertersNo
Compatible with IronRidge CAMO No
Pmax - Maximum Power (STC) [W]
Voc - Open Circuit Voltage (STC) [V]
Isc - Short Circuit Current (STC) [A]
Vmpp-Voltage at Maximum Power (STC) [V]
Impp-Current at Maximum Power (STC) [A]
Cell Efficiency (STC) [%]
Module Efficiency (STC) [%]
Pmax - Maximum Power (NOCT) [W]
Voc - Open Circuit Voltage (NOCT) [V]
Isc - Short Circuit Current (NOCT) [A]
Impp-Current at Maximum Power (NOCT) [A]
Vmpp-Voltage at Maximum Power (NOCT) [V]
Cell Efficiency (NOCT) [%]
Module Efficiency (NOCT) [%]
Nominal Operating Cell Temperature NOCT
Maximum System Voltage [V]
Series Fuse Rating [A]
Maximum Reverse Current [A]
Cell Technology
Solar Cell's Country of Origin
Solar Cell Size
Number of Cells (Pieces)
Number of Bypass Diodes
Frame Color
Back Cover
Frame Size [mm]
Module Length [in]
Module Width [in]
Junction Box
Output Cables
Connector
Hail Safety Impact Velocity [mm at m/s]
Fire Safety Classification (IEC 61730)
Static Load Wind / Snow [Pa]
Normal Operating Cell Temperature (NOCT)
Temperature Coefficients of P [%/Â°C]
Temperature Coefficients of V (Uoc)
Temperature Coefficients of I (Isc)
Storage Temperature [Â°C]
Packaging Configuration
Loading Capacity (40 ft. Container)
80% Power Output Warranty Period
90% Power Output Warranty Period
Workmanship Warranty Period
CSI Listed

Fuses and Holders
Amps [A]

Data Logers
Bluetooth (BT)No
WiFi (wireless LAN)No
Powermanagement (PM+)No
Powermanagement (PM+) / GPRSNo
Powermanagement (PM+) / WiFiNo
GPRSNo
Central inverter SCB and SMBNo
Max. no. inverters
Communication interface
Inverter mixed operationNo
Measured max. plant size [kWp]
Max. cable length
String monitoring-depends on inv. modelNo
Inverter failureNo
Performance monitoring for each inverterNo
Status/fault monitoringNo
Connection to sensor systemNo
Connection to Sensor BasicNo
Email and SMS alarmNo
Local alarm (pot. free contact)No
Yield forecastingNo
Degradation calculationNo
Connection to digital meter readerNo
Integrated webserverNo
Graphic visualisation - local PCNo
Graphic visualisation - USB stickNo
Graphic visualisation - internetNo
LED status displayNo
Operation on deviceNo
Large display RS485/S0 pulseNo
Sâ‚€ in/out
Ethernet networkNo
USB stickNo
Analogue modem / GPRS(GSM)No
Potential-free contact (relay)No
Alarm contact (anti-theft)No
Mains voltage / device voltage [Vac/Vdc]
Power consumption [W]
Ambient Temperature [Â°C(Â°F)]
Assembly
Protection class for logger
Connection to Solar-LogTM WEBNo
Multilingual (DE, EN, ES, FR, IT, NL)No
Memory

Connectors
Pre-configured (p), Configurable (c)
Test Specifications
LockableNo
Protection Type Connected / Disconnected
Approved Temperature Range [Â°C]
Rated Current, Specified Cable Cross-sec
Contact Resistance [mÎ©]
Max. System DC Voltage [V]
Protection Class
Contact Material
Plug Face is Similar to
Combinable w original type confirmed by
Measurements (length x cross-section)

Combiners
Usable Cable Cross-section
Number of Breakers
Number of Fuse Holders
Combiner Voltage Rating (VDC)
Combiner Maximum DC Current (A)
Max. Input Short Cir. Current/String [A]
Maximum Continuous Current (A)
Max. Input Current Per String (A)
Combiner Maximum Voltage (VDC)
Combiner Positive Output Wire Size (mm2)
Output Wire Size (mm2)
Max. Positive Input Wire Size (mm2)
Max. Negative Input Wire Size (mm2)
Combiner Negative Output Wire Size (mm2)
Combiner Input Wire Size (mm2)
Combiner Enclosure Rating
Combiner Maximum Input Fuse Rating (A)
Combiner Operating Temperature (CËš)

Cables
Reel Length (Imperial)
Cable (Wire) Size [mmÂ² (AWG)]
Jacket Color
Cable Conductor Material
Cable Voltage Rating [V]

Breakers
Circuit Breaker Amps [A]
Poles
AC Voltage Rating [Vac]
DC Voltage Rating [Vdc]
FusedNo

Wireless Technology
MiMo
Surge Suppression
WiFi Standard
Min Concurrent Clients
Concurrent Clients
Channel Spacing
Max Transmit Power (dBm)

Video
Video Compression
Resolution
Max Frame Rate
Image Setting
Night Mode
Microphone
View Angle (degree)

Switches
Switching Capacity (Gbps)
Total Non Blocking Throughput
Forwarding Rate (MPPS)
Ports
No. of Data Ports

Regulatory / Compliance Info
FCC Regulations
Certifications / Wireless Approval

Building Materials
Knockout Size (Inch)
Outside Diameter (Inch)
Inside Diameter (Inch)
Wall Thickness (Inch)
Material
Color
Exposure (Inch)
Shingles Per Square
Wind Resistance (mph)

Related Items

Other customers also bought

MULTI-CONTACT MC4 FEMALE Cable Coupler PV-KBT4/6II-UR

MULTI-CONTACT MC4 FEMALE Cable Coupler PV-KBT4/6II-UR

Price: Please, login or register to see prices.

IRONRIDGE XR10 Rail 168 inch (14 Feet) Clear Anodized

IRONRIDGE XR10 Rail 168 inch (14 Feet) Clear Anodized

Price: Please, login or register to see prices.

MULTI-CONTACT MC4 MALE Cable Coupler PV-KST4/6II-UR

MULTI-CONTACT MC4 MALE Cable Coupler PV-KST4/6II-UR

Price: Please, login or register to see prices.

IRONRIDGE XR10 Rail 204 inch (17 Feet) Clear Anodized

IRONRIDGE XR10 Rail 204 inch (17 Feet) Clear Anodized

Price: Please, login or register to see prices.

ENPHASE ET-TERM-1 Branch Terminator for M215 / M250

ENPHASE ET-TERM-1 Branch Terminator for M215 / M250

Price: Please, login or register to see prices.

IRONRIDGE Wire Clip Molded PVC Black (Polybag, 20pcs)

IRONRIDGE Wire Clip Molded PVC Black (Polybag, 20pcs)

Price: Please, login or register to see prices.

ENPHASE 240VAC 1-Phase Trunk Cable M215 / M250 PORTRAIT

ENPHASE 240VAC 1-Phase Trunk Cable M215 / M250 PORTRAIT

Price: Please, login or register to see prices.

IRONRIDGE End Cap for XR10 Rail (Polybag 20)

IRONRIDGE End Cap for XR10 Rail (Polybag 20)

Price: Please, login or register to see prices.

No Reviews Available.

Please, login or register to see prices.

Est. Ship Out Time:
Min. Qty Order:
Sold in Quantities Of:
Note: Sold in boxes of 12

QTY

QuickMount Low Slope no flashing 6 1/2 post+1/2in base Mill

Price: Please, login or register to see prices.

Average Rating

(0)

Product Features

QuickMount Low Slope no flashing 6 1/2 post+1/2in base Mill

QuickMount, Mounts for Low Slope Roofs -no flashing, 6 1/2" post + 1/2" base, Mill Finish | QTY 12: QMLSH-7 A 12

Sold Individually

Quick Mount PV's QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. It's the strongest you can buy for mechanically attaching commercial solar systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low-slope roofs (aka 'flat roofs') used in commercial roofing.

Each QuickMount kit includes:
• Cast aluminum QBase
• Two zinc-coated steel lag bolts, 5/16" x 3"
• Aluminum post, 1.25" x 6.5", 8.5" or 11.5"
• EPDM-bonded stainless steel sealing washer, 5/16" x 1-1/4"
• Stainless steel machine bolt, 5/16" x 1"
• Stainless steel fender washer, 5/16" x 1"
• Stainless steel split lock washer, 5/16"
• Grade-8 machine bolt, 5/16'' x 3/4''

Quick Mount PV's QBase Low Slope Mount Features:
• Code compliant for all non-metal low slope roofs
• QBase is the strongest off-the-shelf mechanical mount
• All exposed hardware is 18-8 stainless steel
• 3 post heights offer 7", 9" and 12" clearance off the deck
• Attaches to roof with 2 or 4 fasteners
• 25-year warranty; 50-year expected life
• Meets or exceeds roofing industry best practices
• All fasteners and hardware included

Tools needed for installation of the Quick Mount PV's QBase Low Slope Mount:
1. Tape measure
2. Chalk line
3. Caulking gun
4. Roofing-compatible flashing and related waterproofing materials
5. Drill with 1/4" bit
6. Drill or impact gun with 1/2" deep socket

Product Specifications

Learn

People Also Bought

QuickMount Low Slope no flashing 3 1/4 post+1/2in base Mill

QuickMount Low Slope no flashing 3 1/4 post+1/2in base Mill

QuickMount Low Slope no flashing 8 1/2 post+1/2in base Mill

QuickMount Low Slope no flashing 8 1/2 post+1/2in base Mill