Solar-Log 1000The ideal data logger for small and medium-sized plants with up to one hundred inverters
Not only does the Solar-Log1000 compare individual strings and inverters with each other - it can even control consumers according to requirements.
The beautifully shaped device for failure and yield monitoring with two-line text display and easy to operate keypad.Solar-Log™ WEB - FREE for installations up to 30kWThe perfect solar monitoring platform - simple, secure, efficient.For technically adept plant owners who want to monitor their own plant.Solar-Log™ WEB Classic 2nd Edition“Classic 2nd Edition” offers the basic functions for plant monitoring. Private plant owners monitor their own plant and independently evaluate faults. The yields and evaluations are depicted in the form of graphics. WEB Classic 2nd Edition offers all of the basic functions of plant monitoring via internet, including event logs and daily forwarding of yield and fault reports to an email address. Plants up to 30kWp are free of charge; for those over 30kWp minimum fees apply.
Easy to install
Thanks to its special housing the Solar-Log500 can also be installed perfectly in living areas. The cable routing is covered by the generous housing. It can be operated via the keypad with its two-line text display or via the PC connected to it. As for all Solar-Logs, the Solar-Log500 is also multi-vendor capable and compatible with all popular inverters (see table on left).
Comprehensive performance comparison
The Solar-Log1000 not only measures and compares the yield data of the individual strings, but also the performance data of the individual inverters. This allows errors and malfunctions that are for example due to obscured sunlight, rodent gnawing or inverter failure to be quickly and reliably analyzed.
Configurable alarm function
Alarms are sent out automatically via email or SMS as preferred. Daily yield notifications are also possible. Furthermore, all status and error messages can be conveniently called up from any web-enabled PC.
Reliable diagnosis
Every 15 seconds the Solar-Log500 checks the performance data of the plant and logs up to 200 events per inverter. In addition it also identifies derating conditions or network malfunctions being experienced by the power network operator.
Comparison of strings and inverters
The Solar-Log1000 monitors up to one hundred inverters with a total output of up to 50 kWp. The monitoring function covers both the comparison of individual strings and the comparison of all connected inverters among each other. This allows malfunctions to be easily and securely diagnosed even for larger plants.
Graphic data preparation
Not only does the web-based software make installation easier, it also allows both tabular and clear graphic display of daily, monthly and annual yields - available at any time, anywhere in the world. Data can also be easily integrated into your personal homepage. Use Solar-Log™ WEB for optimum plant evaluation or ask your installer about the many advantages of the professional functions contained in Solar-Log™WEB.
Alarm function
Every 15 seconds Solar-Log™ analyzes the inverter status, the yield profile and the characteristics of supply into the power network. Four coloured status LEDs and a two-line text display on the device itself show the current status as well as malfunctions or failures.
The Solar-Log1000 sends out alarm messages via email or SMS as preferred. Receive to-the-minute error messages on your mobile telephone or your PC.
Your solar technician can link the Solar-Log500 with the professional monitoring function in the Solar-Log™ WEB on request. He will then be automatically notified in the event of malfunction and can immediately commence remedying the malfunction at your plant.
Easy Installation
With Solar-Log™ Easy installation it is now easier to install the Solar-Log™. The Solar-Log™ is doing automatically an inverter recognition on all most common inverters and the configuration of these inverters is done automatically within the Solar-Log™.
For the internet connection the Solar-Log™ is registering itself on the Solar-Log™ WEB registration server. The user can then pull the Solar-Log™ from there to his Solar-Log WEB™ Classic II account or Solar-Log™ WEB commercial edition account with the PC at his office.
Bluetooth
The Solar-Log500 is optionally available with a Bluetooth module for wireless connection to the new inverter generation from the manufacturer SMA. This allows a cordless connection between the inverter and the Solar-Log™ - rapid and simple installation, with mounting as desired.
Product information Solar-Log™ Bluetooth
Solar-Log™ with WiFi
The Solar-Log 200/500/1000 is also available with WiFi option. This applies for the standard Solar-Log™ as well as for the Bluetooth version. An internet cable connection is not required. Prerequisites are only a WiFi router. WiFi Repeater might be requiriered on poor signals.
Updates
Updates for the firmware of the Solar-Log500 are available free of charge at www.solar-log.com and can be updated automatically or manually.
Yield forecasting and degradation calculation
With the Solar-Log500 you not only see the yield that your photovoltaic plant has already attained. The Solar-Log™ also conducts yield forecasts using the experienced data stored in the software. Deviations in the yield, for example due to blocked sunlight or damage can thus be quickly recognized and remedied.
It is not only damage which leads to a decreased output for the plant, aging modules do too. Solar-Log™ incorporates the so-called module degradation into the yield evaluation and takes into it account when analyzing errors.
Product Specifications
- Characteristics
- ManufacturerSolar Data Systems, Inc. (SolarLog)
- ModelSOLAR-LOG 1000
- Other Vendor Codes
- Rated Power Output [W]
- Length [mm (in)]15.75 in
- Width [mm (in)]11 in
- Depth [mm (in)]5.5 in
- Weight [kg (lb)]10 lb
- Warranty [Years]5
- Surge/Lightning Protection
- Maximum Volts [Vdc]
- Discharge Current [kA]
- Nominal DC Voltage Range [Vdc]
- Nominal AC Voltage [Vac]
- Modules
- PTC Power Rating [W]
- Tier Level
- Lower Output Tolerance [-%]
- Upper Output Tolerance [%]
- Only suitable for transformer invertersNo
- Compatible with IronRidge CAMO No
- Pmax - Maximum Power (STC) [W]
- Voc - Open Circuit Voltage (STC) [V]
- Isc - Short Circuit Current (STC) [A]
- Vmpp-Voltage at Maximum Power (STC) [V]
- Impp-Current at Maximum Power (STC) [A]
- Cell Efficiency (STC) [%]
- Module Efficiency (STC) [%]
- Pmax - Maximum Power (NOCT) [W]
- Voc - Open Circuit Voltage (NOCT) [V]
- Isc - Short Circuit Current (NOCT) [A]
- Impp-Current at Maximum Power (NOCT) [A]
- Vmpp-Voltage at Maximum Power (NOCT) [V]
- Cell Efficiency (NOCT) [%]
- Module Efficiency (NOCT) [%]
- Nominal Operating Cell Temperature NOCT
- Maximum System Voltage [V]
- Series Fuse Rating [A]
- Maximum Reverse Current [A]
- Cell Technology
- Solar Cell's Country of Origin
- Solar Cell Size
- Number of Cells (Pieces)
- Number of Bypass Diodes
- Frame Color
- Back Cover
- Frame Size [mm]
- Module Length [in]
- Module Width [in]
- Junction Box
- Output Cables
- Connector
- Hail Safety Impact Velocity [mm at m/s]
- Fire Safety Classification (IEC 61730)
- Static Load Wind / Snow [Pa]
- Normal Operating Cell Temperature (NOCT)
- Temperature Coefficients of P [%/°C]
- Temperature Coefficients of V (Uoc)
- Temperature Coefficients of I (Isc)
- Storage Temperature [°C]
- Packaging Configuration
- Loading Capacity (40 ft. Container)
- 80% Power Output Warranty Period
- 90% Power Output Warranty Period
- Workmanship Warranty Period
- CSI Listed
- Inverters
- Inverter Type
- Maximum/Peak Efficiency [%]
- CEC weighted efficiency [%]
- Transformer / Transformerless
- DC Power Rating [W]
- Nom. DC Voltage [V]
- Max. Input Power [W]
- Max. Input Voltage [V]
- Max. Input Current [A]
- MPP voltage range [V]
- Min. DC voltage / start voltage [V]
- Feed-in From [W]
- Number of DC String Inputs (Inlets)
- Number of MPP Trackers
- Max. Input Power per MPPT [W]
- Max. Input Voltage per MPPT [V]
- Max. Input Current per MPPT [A]
- Voltage Lower Limit for MPP Range [V]
- Voltage Upper Limit for MPP Range [V]
- DC Disconnection Type
- Reverse-Polarity ProtectionNo
- Ground-Fault Isolation Detection
- AC Power Rating [W]
- Nominal AC Power [W]
- Max. AC Power [W]
- AC voltage range [V]
- AC grid frequency [Hz]
- Max. output current [A]
- Nominal AC Voltage [V]
- Maximum AC Voltage Range [V]
- Nominal AC Frequency [Hz], range [Hz-Hz]
- Max. AC Line Current [A]
- AC Connection Type
- AC Current Distortion [THD%]
- AC DisconnectNo
- AC Input Wire Gauge Range [AWG]
- Max Microinverters Units per xA string
- Sleep (Night) Consumption [W]
- Standby Consumption [W]
- CSI-Approved Built-in MeterNo
- NEMA Enclosure Rating
- Cooling Method
- Ambient Temperature Range [°C(°F)]
- Operating Humidity [%]
- Operating Altitude [ft/m]
- Display
- Communication
- Basic Warranty [Years]
- Warranty Extension Options [Years]
- Safety and EMC Standard
- Grid Standard
- Compliances
- AC grid range [Hz]
- Max. recommended PV power (@ module STC)
- Fuses and Holders
- Amps [A]
- Data Logers
- Bluetooth (BT)No
- WiFi (wireless LAN)No
- Powermanagement (PM+)No
- Powermanagement (PM+) / GPRSNo
- Powermanagement (PM+) / WiFiNo
- GPRSNo
- Central inverter SCB and SMBNo
- Max. no. inverters10
- Communication interface1 x RS485/RS422
- Inverter mixed operationNo
- Measured max. plant size [kWp]50
- Max. cable lengthMax. 1000m
- String monitoring-depends on inv. modelYes
- Inverter failureYes
- Performance monitoring for each inverterYes
- Status/fault monitoringYes
- Connection to sensor systemYes
- Connection to Sensor BasicYes
- Email and SMS alarmYes
- Local alarm (pot. free contact)No
- Yield forecastingYes
- Degradation calculationYes
- Connection to digital meter readerYes
- Integrated webserverYes
- Graphic visualisation - local PCYes
- Graphic visualisation - USB stickNo
- Graphic visualisation - internetYes
- LED status displayYes
- Operation on deviceNo
- Large display RS485/S0 pulseNo
- Sâ‚€ in/out+/-
- Ethernet networkYes
- USB stickNo
- Analogue modem / GPRS(GSM)No
- Potential-free contact (relay)No
- Alarm contact (anti-theft)No
- Mains voltage / device voltage [Vac/Vdc]115 V – 230 V/ 12 V
- Power consumption [W]3
- Ambient Temperature [°C(°F)]-10°C to +50°C
- AssemblyWall assembly
- Protection class for loggerIP 20 (for inside use only)
- Connection to Solar-LogTM WEBYes
- Multilingual (DE, EN, ES, FR, IT, NL)Yes
- Memorymicro SD, 2 GB, unending data display
- Connectors
- Pre-configured (p), Configurable (c)
- Test Specifications
- LockableNo
- Protection Type Connected / Disconnected
- Approved Temperature Range [°C]
- Rated Current, Specified Cable Cross-sec
- Contact Resistance [mΩ]
- Max. System DC Voltage [V]
- Protection Class
- Contact Material
- Plug Face is Similar to
- Combinable w original type confirmed by
- Measurements (length x cross-section)
- Combiners
- Usable Cable Cross-section
- Number of Breakers
- Number of Fuse Holders
- Combiner Voltage Rating (VDC)
- Combiner Maximum DC Current (A)
- Max. Input Short Cir. Current/String [A]
- Maximum Continuous Current (A)
- Max. Input Current Per String (A)
- Combiner Maximum Voltage (VDC)
- Combiner Positive Output Wire Size (mm2)
- Output Wire Size (mm2)
- Max. Positive Input Wire Size (mm2)
- Max. Negative Input Wire Size (mm2)
- Combiner Negative Output Wire Size (mm2)
- Combiner Input Wire Size (mm2)
- Combiner Enclosure Rating
- Combiner Maximum Input Fuse Rating (A)
- Combiner Operating Temperature (CËš)
- Cables
- Reel Length (Imperial)
- Cable (Wire) Size [mm² (AWG)]
- Jacket Color
- Cable Conductor Material
- Cable Voltage Rating [V]
- Breakers
- Circuit Breaker Amps [A]
- Poles
- AC Voltage Rating [Vac]
- DC Voltage Rating [Vdc]
- FusedNo
- Wireless Characteristics
- Frequency (GHz)
- Output Power (dBm)
- Throughput (Gbps)
- Range
- Min Gain (dBi)
- Max Gain (dBi)
- Antenna Type
- Number of Antennas
- Antenna Beamwidth - Azimuth (H) (Degrees)
- Antenna Beamwidth - Elevation (V) (Degrees)
- Electrical Beamwidth (Degrees)
- Polarization
- Port to Port Isolation (dB)
- Min Cross Pol Isolation (dB)
- Cross Pol Isolation (dB)
- Front to Back Ratio (dB)
- PTP or PTMP
- Licensed
- Wireless Integrated System?
- WiFi Connector
- Wireless Connector
- Number of Connectors
- Electrical Tilt Type
- Min Electrical Tilt (Degrees)
- Max Electrical Tilt (Degrees)
- Mechanical Tilt Type
- Min Mechanical Tilt (Degrees)
- Max Mechanical Tilt (Degrees)
- Lens
- Sensor
- Mounting
- Power Method
- Voltage
- PoE Interfaces
- PoE Adapter IncludedNo
- Wireless Technology
- MiMo
- Surge Suppression
- WiFi Standard
- Min Concurrent Clients
- Concurrent Clients
- Channel Spacing
- Max Transmit Power (dBm)
- Video
- Video Compression
- Resolution
- Max Frame Rate
- Image Setting
- Night Mode
- Microphone
- View Angle (degree)
- Switches
- Switching Capacity (Gbps)
- Total Non Blocking Throughput
- Forwarding Rate (MPPS)
- Ports
- No. of Data Ports
- Regulatory / Compliance Info
- FCC Regulations
- Certifications / Wireless Approval
- Building Materials
- Knockout Size (Inch)
- Outside Diameter (Inch)
- Inside Diameter (Inch)
- Wall Thickness (Inch)
- Material
- Color
- Exposure (Inch)
- Shingles Per Square
- Wind Resistance (mph)
Solar-Log 1000
The ideal data logger for small and medium-sized plants with up to one hundred inverters
Not only does the Solar-Log1000 compare individual strings and inverters with each other - it can even control consumers according to requirements.
The beautifully shaped device for failure and yield monitoring with two-line text display and easy to operate keypad.
My Account 