UNIRAC SolarMount End Clamp K 39-41 mm Dark 302026D

SKU#: 302026D

UNIRAC SolarMount End Clamp K 39-41 mm Dark 302026D

UNIRAC SolarMount End Clamp K Dark 302026D, 39-41 mm (1.54-1.61in), 2.25in T-Bolt, Package of 1
Provides bond from rail to endclamp.
Pre-assembled aluminum clamp.
Supplied washer keeps clamp and bolt upright for ease of assembly.
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty

Installation Instructions:
INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation.

INSERT ENDCLAMP T-BOLT: Insert 1/4” T-bolt into rail.

ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module.

INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.

POSITION INDICATOR - SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.

TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.

TORQUE VALUE 1/4” nuts to 10 ft-lbs w/ Anti Seize

Product Specifications

Characteristics
ManufacturerUnirac
Model302026D
Other Vendor Codes
Rated Power Output [W]1
Length [mm (in)]
Width [mm (in)]
Depth [mm (in)]39-41 mm (1.54-1.61in)
Weight [kg (lb)]
Warranty [Years]10

Surge/Lightning Protection
Maximum Volts [Vdc]
Discharge Current [kA]
Nominal DC Voltage Range [Vdc]
Nominal AC Voltage [Vac]

Modules
PTC Power Rating [W]
Tier Level
Lower Output Tolerance [-%]
Upper Output Tolerance [%]
Only suitable for transformer invertersNo
Compatible with IronRidge CAMO No
Pmax - Maximum Power (STC) [W]
Voc - Open Circuit Voltage (STC) [V]
Isc - Short Circuit Current (STC) [A]
Vmpp-Voltage at Maximum Power (STC) [V]
Impp-Current at Maximum Power (STC) [A]
Cell Efficiency (STC) [%]
Module Efficiency (STC) [%]
Pmax - Maximum Power (NOCT) [W]
Voc - Open Circuit Voltage (NOCT) [V]
Isc - Short Circuit Current (NOCT) [A]
Impp-Current at Maximum Power (NOCT) [A]
Vmpp-Voltage at Maximum Power (NOCT) [V]
Cell Efficiency (NOCT) [%]
Module Efficiency (NOCT) [%]
Nominal Operating Cell Temperature NOCT
Maximum System Voltage [V]
Series Fuse Rating [A]
Maximum Reverse Current [A]
Cell Technology
Solar Cell's Country of Origin
Solar Cell Size
Number of Cells (Pieces)
Number of Bypass Diodes
Frame Color
Back Cover
Frame Size [mm]
Module Length [in]
Module Width [in]
Junction Box
Output Cables
Connector
Hail Safety Impact Velocity [mm at m/s]
Fire Safety Classification (IEC 61730)
Static Load Wind / Snow [Pa]
Normal Operating Cell Temperature (NOCT)
Temperature Coefficients of P [%/Â°C]
Temperature Coefficients of V (Uoc)
Temperature Coefficients of I (Isc)
Storage Temperature [Â°C]
Packaging Configuration
Loading Capacity (40 ft. Container)
80% Power Output Warranty Period
90% Power Output Warranty Period
Workmanship Warranty Period
CSI Listed

Fuses and Holders
Amps [A]

Data Logers
Bluetooth (BT)No
WiFi (wireless LAN)No
Powermanagement (PM+)No
Powermanagement (PM+) / GPRSNo
Powermanagement (PM+) / WiFiNo
GPRSNo
Central inverter SCB and SMBNo
Max. no. inverters
Communication interface
Inverter mixed operationNo
Measured max. plant size [kWp]
Max. cable length
String monitoring-depends on inv. modelNo
Inverter failureNo
Performance monitoring for each inverterNo
Status/fault monitoringNo
Connection to sensor systemNo
Connection to Sensor BasicNo
Email and SMS alarmNo
Local alarm (pot. free contact)No
Yield forecastingNo
Degradation calculationNo
Connection to digital meter readerNo
Integrated webserverNo
Graphic visualisation - local PCNo
Graphic visualisation - USB stickNo
Graphic visualisation - internetNo
LED status displayNo
Operation on deviceNo
Large display RS485/S0 pulseNo
Sâ‚€ in/out
Ethernet networkNo
USB stickNo
Analogue modem / GPRS(GSM)No
Potential-free contact (relay)No
Alarm contact (anti-theft)No
Mains voltage / device voltage [Vac/Vdc]
Power consumption [W]
Ambient Temperature [Â°C(Â°F)]
Assembly
Protection class for logger
Connection to Solar-LogTM WEBNo
Multilingual (DE, EN, ES, FR, IT, NL)No
Memory

Connectors
Pre-configured (p), Configurable (c)
Test Specifications
LockableNo
Protection Type Connected / Disconnected
Approved Temperature Range [Â°C]
Rated Current, Specified Cable Cross-sec
Contact Resistance [mÎ©]
Max. System DC Voltage [V]
Protection Class
Contact Material
Plug Face is Similar to
Combinable w original type confirmed by
Measurements (length x cross-section)

Combiners
Usable Cable Cross-section
Number of Breakers
Number of Fuse Holders
Combiner Voltage Rating (VDC)
Combiner Maximum DC Current (A)
Max. Input Short Cir. Current/String [A]
Maximum Continuous Current (A)
Max. Input Current Per String (A)
Combiner Maximum Voltage (VDC)
Combiner Positive Output Wire Size (mm2)
Output Wire Size (mm2)
Max. Positive Input Wire Size (mm2)
Max. Negative Input Wire Size (mm2)
Combiner Negative Output Wire Size (mm2)
Combiner Input Wire Size (mm2)
Combiner Enclosure Rating
Combiner Maximum Input Fuse Rating (A)
Combiner Operating Temperature (CËš)

Cables
Reel Length (Imperial)
Cable (Wire) Size [mmÂ² (AWG)]
Jacket Color
Cable Conductor Material
Cable Voltage Rating [V]

Breakers
Circuit Breaker Amps [A]
Poles
AC Voltage Rating [Vac]
DC Voltage Rating [Vdc]
FusedNo

Wireless Technology
MiMo
Surge Suppression
WiFi Standard
Min Concurrent Clients
Concurrent Clients
Channel Spacing
Max Transmit Power (dBm)

Video
Video Compression
Resolution
Max Frame Rate
Image Setting
Night Mode
Microphone
View Angle (degree)

Switches
Switching Capacity (Gbps)
Total Non Blocking Throughput
Forwarding Rate (MPPS)
Ports
No. of Data Ports

Regulatory / Compliance Info
FCC Regulations
Certifications / Wireless Approval

Building Materials
Knockout Size (Inch)
Outside Diameter (Inch)
Inside Diameter (Inch)
Wall Thickness (Inch)
Material
Color
Exposure (Inch)
Shingles Per Square
Wind Resistance (mph)

Related Items

Other customers also bought

UNIRAC Mid Clamp DARK DK 38-41mm Bonding SolarMount 302029D

UNIRAC Mid Clamp DARK DK 38-41mm Bonding SolarMount 302029D

Price: Please, login or register to see prices.

UNIRAC Grounding Weeblug-1 008002S SolarMount SM

UNIRAC Grounding Weeblug-1 008002S SolarMount SM

Price: Please, login or register to see prices.

UNIRAC Wire Clip for Double PV Wire DCS-1307, Qty 1

UNIRAC Wire Clip for Double PV Wire DCS-1307, Qty 1

Price: Please, login or register to see prices.

UNIRAC Microinverter Rail Attachment T-Bolt and Nut Clear

UNIRAC Microinverter Rail Attachment T-Bolt and Nut Clear

Price: Please, login or register to see prices.

UNIRAC L-Foot Clear Serrated with T-Bolt SolarMount SM Qty.1

UNIRAC L-Foot Clear Serrated with T-Bolt SolarMount SM Qty.1

Price: Please, login or register to see prices.

UNIRAC - Splice Bar Clear Bonding Serrated SolarMount SM Qty.1

UNIRAC - Splice Bar Clear Bonding Serrated SolarMount SM Qty.1

Price: Please, login or register to see prices.

Capital Shipping Insurance

Capital Shipping Insurance

Price: Call For Price

UNIRAC End Cap Black For LIGHT Rail SolarMount SM Qt.1

UNIRAC End Cap Black For LIGHT Rail SolarMount SM Qt.1

Price: Please, login or register to see prices.

No Reviews Available.

Please, login or register to see prices.

Est. Ship Out Time: 2 Days
Min. Qty Order:
Sold in Quantities Of:
Note:

QTY

UNIRAC SolarMount End Clamp K 39-41 mm Dark 302026D

Price: Please, login or register to see prices.

Average Rating

(0)

Product Features

UNIRAC SolarMount End Clamp K 39-41 mm Dark 302026D

UNIRAC SolarMount End Clamp K Dark 302026D, 39-41 mm (1.54-1.61in), 2.25in T-Bolt, Package of 1
Provides bond from rail to endclamp.
Pre-assembled aluminum clamp.
Supplied washer keeps clamp and bolt upright for ease of assembly.
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty

Installation Instructions:
INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation.

INSERT ENDCLAMP T-BOLT: Insert 1/4” T-bolt into rail.

ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module.

INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.

POSITION INDICATOR - SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.

TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.

TORQUE VALUE 1/4” nuts to 10 ft-lbs w/ Anti Seize

Product Specifications

Learn

People Also Bought