UNIRAC RM5 RMDT End Clamp 46-50mm
SKU#: 310822
- Details
- Characteristics
- Surge/Lightning Protection
- Modules
- Inverters
- Fuses & Holders
- Data Loggers
- Connectors
- Combiners
- Cables
- Breakers
- Wireless Characteristics
- Physical Characteristics
- Wireless Technology
- Videos
- Switches
- Regulatory
- Building Materials
Details
UNIRAC RM5 RMDT End Clamp 46-50mm
UNIRAC RM5 (5 degree tilt) and RMDT (Dual Tilt) End Clamp for 46mm-50mm frame size ¼-20 X 2 ½ inch Hex Head Bolt
The Module Clamp is made of Stainless Steel and can be used with module frame heights indicated on the clamp. The clamps are a portion of the UL2703 Listed system when installed according to this installation guide. A ¼-20 stainless steel bolt and u-nut are the associated hardware for installing clamps.
NOTE: U-NUT - Single Use Only - Do not re-torque once fully seated
NOTE: CLAMP AND BOLT - Single Use Only - Do not re-torque once fully seated TORQUE VALUE: 7FT-LBS MINIMUM to achieve UL2703 required clamp load
RM5 End Clamp Drawing Dimensions Datasheet:
RMDT End Clamp Drawing Dimensions Datasheet:
UNIRAC RM5 (5 degree tilt) and RMDT (Dual Tilt) End Clamp for 46mm-50mm frame size ¼-20 X 2 ½ inch Hex Head Bolt
The Module Clamp is made of Stainless Steel and can be used with module frame heights indicated on the clamp. The clamps are a portion of the UL2703 Listed system when installed according to this installation guide. A ¼-20 stainless steel bolt and u-nut are the associated hardware for installing clamps.
NOTE: U-NUT - Single Use Only - Do not re-torque once fully seated
NOTE: CLAMP AND BOLT - Single Use Only - Do not re-torque once fully seated TORQUE VALUE: 7FT-LBS MINIMUM to achieve UL2703 required clamp load
RM5 End Clamp Drawing Dimensions Datasheet:
RMDT End Clamp Drawing Dimensions Datasheet:
Characteristics
- Manufacturer: UNIRAC
- Model: 310822
- Length [mm (in)]: 1.94in
- Width [mm (in)]: 2.25in
- Depth [mm (in)]: 1.25in
- Weight [kg (lb)]: 0.275lb