Unirac SolarMount End Clamp K Clear 302026C
Unirac SolarMount End Clamp K Clear 302026C,
39-41mm (1.54-1.61in), 2.25 in T-bolt,
Package of 1
Provides bond from rail to endclamp.
Pre-assembled aluminum clamp.
Supplied washer keeps clamp and bolt upright for ease of assembly.
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty
INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation.
INSERT ENDCLAMP T-BOLT: Insert 1/4- T-bolt into rail.
ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module.
INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.
POSITION INDICATOR - SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.
TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.
TORQUE VALUE 1/4- nuts to 10 ft-lbs w/ Anti Seize